Tap Replacement in Burpengary
Swapping an old basin set for a new mixer is one of the upgrades we fit most often. Tap replacement in Burpengary is done by a licensed plumber under Queensland rules, and we install mixers, separate sets and wall-mounted styles across Burpengary and the neighbouring suburbs.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
This page sits with our tap and toilet services. If a washer or cartridge would solve the problem, tap repairs is the better stop; this page is about the full swap.
Mixer Taps and Separate Taps Compared
A mixer tap joins the hot and cold supplies at a single spout, worked by one lever or two handles, while separate taps give each supply its own outlet. The style you pick has to match what the bench or basin already allows.
Three things decide the fit:
Hole layout
how many holes the bench or basin was cut with, and how wide they are.
Mounting
whether the tap sits on the bench or on the wall.
Supply hook-ups
the connections beneath, which we check against the new fitting.
A wall-mounted unit draws its water from pipework within the wall, so switching between wall and bench mounting alters the wall or the benchtop too, not only the tap. An isolation valve on each supply line closes off the water to just that fitting, without shutting down the whole house.
The 9 Litres per Minute Rental Tap Rule
Cold-water taps indoors and single mixer taps in a rental are capped at 9 litres a minute before an owner can charge a tenant for every litre used. The test is about water charging, not a standard every rental tap has to meet on its own.
Which fittings count:
- cold taps above a hand basin, the kitchen sink or the laundry tub, mixers included
- nothing else: bathtub taps, garden taps outside and taps feeding machines such as washers and dishwashers sit outside the test
For fixtures produced from 2005 onwards, look for a rating of 3 stars or higher under the water-rating scheme. The Residential Tenancies Authority also recommends owners keep plumbing reports, compliance papers, receipts, boxes and instruction manuals as proof the taps pass.
Certification Rules for Replacement Taps
WaterMark certification means a tap has passed the safety and fitness checks in Australia's plumbing code. WELS, which stands for Water Efficiency Labelling and Standards, gives each fitting its stars and its flow figure. A replacement tap needs both marks before we can legally install it.
Business Queensland sets a 3-star minimum for tapware and shower fittings, and states that renovations sit outside that rule.
Buying online? The listing has to display the WaterMark symbol, the product spec and licence number, and the WELS entry number or registered model name with the stars and flow. You can look any model up in either database before paying.
Who May Replace a Tap in Queensland
Tap replacement belongs to licensed plumbers in Queensland. The QBCC names the jumper valve or the washer as the one tap job on its unregulated list, done with the right know-how, and that work still has to meet the standards. Washers inside cisterns sit on the same list, and cistern work has its own page.
The paperwork splits two ways:
Like for like
swapping an existing tap is minor work, so a QBCC licensee carries it out, no permit is required and no Form 4 goes to the QBCC.
A new position
putting a tap somewhere it has never been is notifiable work. The Form 4 reaches the QBCC within 10 business days of completion, and the contractor's lodgement fee may be passed to the owner.
Renters need the owner or manager to approve in writing, using Form 23, before attaching a fixture, and a refusal needs a proper reason. If a tenant fits something without that sign-off, the owner or manager has three options. They can view the work as a breach and attempt to resolve the dispute, welcome the fitting as an improvement, or remove it and recover the removal cost from the tenant.
Like for Like or a New Tap Position
The bill for a swap hinges on the tap you pick and whether the shut-off valves and hook-ups beneath can be kept. The existing holes and the access under the basin matter as well, and so does how many taps you replace in one visit.
For a tap in a fresh position, the Form 4 lodgement fee may be passed on. You get a fixed quote before any work starts, so the price is confirmed on paper before a tool comes out.
What Local Housing Means for Tapware
At the last census, 26.3 per cent of homes here were owned outright and 41.0 per cent carried a mortgage. Most households are owners, free to upgrade tapware when they choose. Much of the housing went up from the 1980s through to the 2000s, so plenty of those homes are on their second or third set of taps.
The bigger houses along New Settlement Road tend to hold several bathrooms and a laundry, so one visit often covers a whole round of mixers. Rentals are part of the mix too, and that is where the 9-litre test above earns its keep for owners.
How We Replace Your Tap
- 1
Tell us what's happening
Call (07) 3524 7137 or send the form with a few details about the problem in Burpengary. A clear description helps us bring the right parts.
- 2
We size up the bench and the pipework
We look at the outgoing tap, the holes cut in the bench or basin, the shut-offs and the supply hook-ups, so the replacement you choose actually fits what is already there.
- 3
Approve a fixed price
You get a fixed quote before any work starts, with flat-rate pricing and no hidden fees. Nothing goes ahead until you say yes.
- 4
Pay when it's finished
Pay by card or EFTPOS on site once the job's done, or ask about Fix now, pay later.
Plumbing job in Burpengary?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions We Hear
Call (07) 3524 7137Can I replace a tap myself in Burpengary?
No, not the whole tap. Queensland law reserves tap replacement for licensed plumbers, and the QBCC uses it as an example of work outside the short list of jobs a home owner may do. The one tap task on the unregulated list is replacing the jumper valve or the washer, and even that has to meet the standards.
Can I buy my own tap and have a plumber fit it?
Yes, provided the tap carries the right marks. Check for WaterMark certification and a WELS label with its stars and flow figure before you buy, because that certification is what lets a licensed plumber install the fitting legally. Online listings have to show those details, and both databases are searchable by model name.
How much does it cost to replace a tap in Burpengary?
Two things drive the price most: the tap you choose, and whether the shut-off valves and hook-ups beneath can be kept. Hole layout and access under the basin play a part too. You get a fixed quote before any work starts, so the total is confirmed on paper first.
Can a tenant replace a tap in a rental?
No, replacing a tap is licensed work, so the owner or property manager arranges it. A tenant who wants to attach any fixture or make a structural change needs approval in writing via Form 23 first, and the request cannot be refused without a proper reason.
Do taps in Queensland homes need a minimum WELS rating?
Yes, every tap sold carries WELS registration with its stars and flow figure on the label. Business Queensland requires 3 stars or more on new tap and shower fittings, and states that renovations sit outside that rule. Whether a like-for-like swap counts as a renovation is not something we advise on.
Call Us About the New TapWe'll call you back.
Call (07) 3524 7137 to book a plumber in Burpengary. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
To claim your $0 call-out fee, call (07) 3524 7137 today.